When your shower slows to a trickle, or it seems like it takes forever for the washing machine to fill up, low water pressure might be the culprit. A strange whistling coming from the pipes could be another sign that your pressure isn't up to snuff. However you look at it, low water pressure in your plumbing installations is an annoying problem that can interfere with your day-to-day domestic chores and hygiene routine. Read on to learn a few reasons why your pressure might be less than optimal, and what you can do about it.
A Leak in the Plumbing Installation
If you have an undetected leak somewhere in your home, low water pressure is the least of your problems. In fact, you should be thankful for the heads-up, because if you allow the water to build up over time, it will drive up your water bill, weaken the structural integrity of your home and promote mold and mildew growth. Keep an eye on your water meter to check for unusual consumption levels, and look around your home for any discolored spots in your walls, ceilings and floors. If you do discover a leak, have a plumber repair it before it causes major damage.
Buildup in the Pipes
Your pipes are smooth on the inside and designed to allow water to effortlessly pass through with a minimum of friction, but various factors can cause buildup to occur in your plumbing installations and slow down the water's passage. If you live in an area with hard or mineral-laden water, it can create deposits inside the pipes over time. One potential solution is to use a water softener to reduce the mineral content.
Sometimes, actual dirt and debris can end up in your plumbing installation due to a break somewhere in the municipal system – this type of buildup can be flushed out with chemicals, or physically removed if you can locate the blockage within the pipes. Finally, the pipes themselves can corrode, depending on the materials from which they’re made. If this is the case, you may be looking at putting in a whole new plumbing installation before too long.
Sometimes, the origin of low water pressure isn't in your home at all, but in the plumbing installation of your municipality. There could be a leak or buildup somewhere in the water main, which prevents water from entering your home at full pressure, or the system could be facing some other problem. If you suspect this is the cause of your weak water flow, call your local water department to find out if they are aware of any issues with the supply.
For help with diagnosis and repair of all your water pressure problems, call an expert plumber today.