We're Open & Here For You! Important Coronavirus Information - Click Here to Learn More

Common Water Heater Repair Issues | Sugar Land, TX

Common Water Heater Repair Issues | Sugar Land, TX

Photo By Дерябин Андрей Николаевич at istcok

When is the last time you thought about where your hot water comes from? Most likely you don't think about it at all, that is until you start to have a problem and require water heater repair in Sugar Land, TX. Water heater repair can be complicated, which is why it is always a better idea to hire a professional in Sugar Land, TX to handle any problems that you may be having.

Waking up to no hot water or a shower that takes an excessively long time to heat up is not ideal, but it can be fixed with a call to a plumbing company that specializes in water heater repair. While there are dozens of things that can be wrong with your water heater, there are a few common issues that tend to arise time and time again. Here is a brief overview of the most common water heater repair issues in Sugar Land, TX so you can be prepared for what your plumber may tell you.

Faulty Burner Issues

Many times, gas-powered water heaters have issues with the burner. The same way the pilot can go out in a gas furnace or have troubles ignoring, a gas-powered water heater can start to rust or get debris on the surface resulting in issues with ignition. Unless you inspect the burner, it will continue to misfire resulting in your water staying cool. Unaddressed, this can also become a safety hazard because of the gas, so it is something you want to address promptly. Any burner issues should always be inspected by a water heater repair professional.

Other problems that may be causing the burner to misfire include a blockage in the gas line or low gas flow in general due to other issues. Both of these will prevent the hot water tank from heating properly. As mentioned, natural gas repairs can be very dangerous and you could put your safety and your family's safety on the line if you try to investigate on your own. An experienced technician, on the other hand, can safely and quickly investigate the issue.

Broken Dip Tubes

While it may not sound like much, the dip tube is an integral part of your water heater system. It is responsible for carrying cold water from the city supply down into the water heater tank and deposits it at the bottom of the tank. This is so the heat exchanger can then warm it with combustion jets. Naturally, as the water begins to warm it floats towards the top of the tank.

If the dip tube starts to malfunction or breaks off inside of the tank then the cold water will be deposited at the top of the tank instead of near the bottom with the heating element. As a result, the cold water will heat with the heated water creating lukewarm water instead of properly heated water. If you notice that suddenly your hot water is running out, there is a good chance that your dip tubes need to be inspected. The good news is this is a fairly simple hot water repair for a trained technician and it will not require you to install a new tank.

Faulty Heating Elements

Of course, the most obvious issue behind a lack of hot water is a faulty heating element. If you have an electric water heater, then this is likely the cause of a sudden lack of hot water. Electric water heaters depend on two heating elements housed inside of the water tank to heat water for your home. If one of the heating elements fails then you will start to get lukewarm water instead of fully heated hot water. If both of the heating elements fail, then you will only have cold water. A properly trained water heater repair technician will be able to drain your tank, open it up, and replace the broken heating element.

A Leaking Tank

No one wants to walk into their utility room or basement and find their water heater tank leaking. At this point not only will they likely lose their hot water, but they also have to deal with flood damage. This is certainly an issue that you want to resolve quickly before the costs get out of hand. In most cases, a leaking hot water tank means that it is time to replace it, but there are a few minor issues that a water heater repair technician can fix.

The best thing you can do is turn off your water to prevent further leaking and then call a water heater repair company so you can get to the bottom of the leak. If something simply needs tightened or replaced you may be okay for a few more years, but if the leak is coming straight out of the tank then you will likely need to replace your water heater.

In either scenario, you will want the advice of a plumber before making your next move. A plumber can help you determine the best size and type of water heater to fit your current needs. They can also install it for you which can help extend its lifespan, simple improper installation is the leading reason that water heaters experience problems in their first few years.

Regardless of the cause of your water heater issue, there is one thing that all of the above-mentioned issues have in common: they are best addressed by a professional. If you need water heater repair it is best to allow a trained technician to handle the problem so it can be dealt with safely and efficiently. The trained plumbers at Benjamin Franklin Plumbing of Houston are always available and ready to help in an emergency. They also offer routine maintenance services to help catch some of these issues before they impact your water supply.