All About Plumbing Pipes | Tips from Your Katy, TX Plumber

Plumbing pipes can easily be classified as the most basic plumbing fixture in your home. There’s a ton of different types of them available out there. Benjamin Franklin Plumbing in the Katy, TX area will be able to guide you as to which one a certain plumbing issue might require, but it helps to know your options thoroughly so you can make an informed decision.

It’s always good to know about the material used to make your home’s plumbing pipes as well as how it affects the overall plumbing and draining that your home experiences. An experienced plumber in the Katy, TX area, can be of great help in this scenario.

In this article, we’ll go over the various types of pipes available, their pros and cons, and more.

Copper Plumbing Pipes

These are your usual choice when it comes to plumbing pipes. Traditionally, most buildings use copper plumbing pipes, and there are good reasons for that. They are known to be extremely long-lasting and reliable. They are easy to manage, resist corrosion, and can be used for both cold and hot water. Copper pipes are less likely to develop a leak and are well-know to stay firmly fitted. As a result, they usually have a long life span. Furthermore, they do not pollute the water running through them and are also recyclable.

The price tag on this one could be considered a potential drawback as this is more expensive than the other options. Moreover, it may also require additional fittings since they have to be welded together to be installed. Needless to say; you must acquire the services of a professional plumber to install these pipes.

Galvanized Steel Plumbing Pipes

Galvanized steel pipes are known for their resilience, but even though they are quite strong and sturdy, they aren’t frequently used. The end of each galvanized pipe is screwed into the next one using connecting joints. However, they are difficult to work with as they are heavier than the other options.

Due to their zinc coating, internal rusting is another potential downside. When the pipes corrode internally, they tend to release lead into your supply of tap water. Furthermore, they are prone to clogging in the long run. However, if you must install these pipes into your house, do not forget to acquire the services of a professional to make sure that any installation is done properly. However, it’s unlikely that a plumber will recommend such pipes for your home use.

Cast Iron Plumbing Pipes

You’ll usually find cast iron plumbing pipes installed in older constructions. They may look old, but these pipes will last till they completely rust through. This makes them a viable choice for sewer pipes, where they are mostly used. Joints are either threaded or bell-and-spigot versions. Threaded ones are more expensive.

They come in a variety of sizes, the smallest one being a mere 4-inch pipe. The installation can be tricky as these pipes are quite heavy and must be supported when being threaded and joined together. You must acquire the services of a professional to install these pipes.

Polyvinyl Chloride (PVC) Plastic Plumbing Pipes

PVC pipes are easier to work with as they are quite lightweight. They are mostly used for sewage and for potable water. They vary in thickness and other configurations depending on where they will be used. Therefore, the ones that are used as pressure water pipes are quite different from the ones used in the sewers. The ones that are meant for potable water applications bear a certain mark (NSF-PW or NSF-61) to confirm compliance with health requirements and health standards.

These plastic pipes generally don’t rust, corrode or degrade with usage. This makes them an excellent choice for sinks, bathtub drain lines, vent stack, and toilets. They’re also quite resilient to high water pressure.

The only downside to these pipes is that they can’t be used for hot water as they’re made of plastic and will warp when subjected to extreme temperature. Acquire the services of any professional plumber whenever you’re looking to install pipes of this material anywhere on your property.

CPVC Plastic Plumbing Pipes

CPVC is quite easy to work with and is used for potable purposes. You can use these pipes for both your cold and hot water needs. They tend to be more flexible than PVC pipes. However, they do have their cons. They can’t be recycled and will split in case they’re frozen, which means that these pipes are not ideal for locations where the winter temperatures drop below freezing.

Cross-Linked Polyethylene Plumbing Pipes

This one also goes by the name of PEX piping and is exclusively used in water supply lines. It is quite lightweight and easy to work with. It comes in a color-coded form and can be easily cut and joined together. Furthermore, it is heat resistant and can be employed for both your hot and cold water supply.

The initial cost may be high, but the little to no maintenance makes up for it. However, these plastic pipes are not a good option for outdoor use as the UV rays can damage the plastic layer. Do not forget to hire a professional plumber to appropriately install it in your house.

Contact Benjamin Franklin Plumbing

As explained above, there are a number of options available out there when it comes to plumbing pipes for your house. And as we’ve discussed above, almost all of them will require the professional services of a plumber in the Katy, TX area to properly install them. Benjamin Franklin Plumbing, with its, 24/7 emergency services, and an extended list of satisfied customers, is definitely that plumber in the that you need. Acquire our impeccable plumbing services if you ever require any plumbing related help in Katy, TX.